Vanadium Iron - Ferro Vanadium – HSG Metal
Vanadium Iron - Ferro Vanadium – HSG Metal Detail:
Specification of Ferrovanadium
|
Brand |
Chemical Compositions (%) |
||||||
|
V |
C |
Si |
P |
S |
Al |
Mn |
|
|
≤ |
|||||||
|
FeV40-A |
38.0~45.0 |
0.60 |
2.0 |
0.08 |
0.06 |
1.5 |
— |
|
FeV40-B |
38.0~45.0 |
0.80 |
3.0 |
0.15 |
0.10 |
2.0 |
— |
|
FeV50-A |
48.0~55.0 |
0.40 |
2.0 |
0.06 |
0.04 |
1.5 |
— |
|
FeV50-B |
48.0~55.0 |
0.60 |
2.5 |
0.10 |
0.05 |
2.0 |
— |
|
FeV60-A |
58.0~65.0 |
0.40 |
2.0 |
0.06 |
0.04 |
1.5 |
— |
|
FeV60-B |
58.0~65.0 |
0.60 |
2.5 |
0.10 |
0.05 |
2.0 |
— |
|
FeV80-A |
78.0~82.0 |
0.15 |
1.5 |
0.05 |
0.04 |
1.5 |
0.50 |
|
FeV80-B |
78.0~82.0 |
0.20 |
1.5 |
0.06 |
0.05 |
2.0 |
0.50 |
|
Size |
10-50mm |
||||||
Products Description
Ferrovanadium is an iron alloy obtained by reducing vanadium pentoxide in an electric furnace with carbon, and can also be obtained by reduction of vanadium pentoxide by electric furnace silicon thermal method.
It is widely used as an elemental additive for smelting vanadium-containing alloy steels and alloy cast irons, and has been used in recent years to make permanent magnets.
Ferrovanadium is mainly used as an alloying additive for steel making.
After adding vanadium iron to steel, the hardness, strength, wear resistance and ductility of the steel can be significantly improved, and the cutting performance of the steel can be improved.
Application of ferrovanadium
1. It Is an important alloy additive in iron and steel industry. It can improve the strength, toughness, ductility and heat resistance of steel. Since the 1960s, the application of ferrovanadium in the iron and steel industry has increased dramatically, to 1988 accounted for 85% of the consumption of ferro vanadium. The proportion of iron vanadium consumption in steel is carbon steel 20%, high strength low alloy steel 25%, alloy steel 20%, tool steel 15%. High strength low alloy steel (HSLA) containing vanadium iron is widely used in the production and construction of oil/gas pipelines, buildings, Bridges, rails, pressure vessels, carriage frames and so on due to its high strength.
2. In the non-ferrous alloy is mainly used to produce vanadium ferrotitanium alloy, such as Ti-6Al-4V, Ti-6Al-6V-2Sn and
Ti-8Al-1V-Mo. Ti-6al-4v alloy is used in the manufacture of aircraft and rockets excellent high temperature structural materials, in the United States is very important, the output of titanium vanadium ferroalloy accounted for more than half. Ferro vanadium metal can also be used in magnetic materials, cast iron, carbide, superconducting materials and nuclear reactor materials and other fields.
3. Is mainly used as an alloy additive in steelmaking. The hardness, strength, wear resistance and ductility of steel
can be significantly improved by adding ferrovanadium into steel, and the cutting performance of steel can be improved. Vanadium iron is commonly used in the production of carbon steel, low alloy steel strength steel, high alloy steel, tool steel and cast iron.
4. Suitable for alloy steel smelting, alloy element additive and stainless steel electrode coating, etc. This standard applies to the production of niobium pentoxide concentrate as raw material for steel making or casting additives, electrode as alloy agent, magnetic materials and other uses of iron vanadium.
Product detail pictures:
Related Product Guide:
Every single member from our large efficiency profits team values customers' requirements and organization communication for Vanadium Iron - Ferro Vanadium – HSG Metal , The product will supply to all over the world, such as: British, Morocco, Czech, All these products are manufactured in our factory located in China. So we can guarantee our quality seriously and availably. Within these four years we sell not only our products but also our service to clients throughout the world.
By Ophelia from Seattle - 2017.07.28 15:46
In general, we are satisfied with all aspects, cheap, high-quality, fast delivery and good procuct style, we will have follow-up cooperation!
By Madge from Florence - 2018.06.05 13:10
Related products
-
Tungsten Bars For Sale - Oem High Purity 99.95...
Product Parameters Brand HSG Standard ASTMB760-07;GB/T3875-83 Grade W1,W2,WAL1,WAL2 Density 19.2g/cc Purity ≥99.95% Size Thick0.05mm min*Width300mm max*L1000mm max Surface Black/Alkali cleaning/ polished Melting point 3260C Process hot rolling chemical composition Chemical composition Impurity content ( % ), ≤ Al Ca Fe Mg Mo Ni Si C N O Balance 0.002 0.005 0.005 0.003 0.01 0.003 0.005 0.008 0.003 0.005 Dimension and permissible variations ...
-
Ferro Molybdenum 60 - Molybdenum Price Customi...
Product Parameters Term Molybdenum bar Grade Mo1,Mo2,TZM,Mla,etc Size as request Surface condition hot rolling, cleaning, polishedc MOQ 1 kilograms Test and Quality dimension inspection appearance quality test process performance test mechanical properities test Load port shanghai shenzhen qingdao Packing standard wooden case, carton or as request Payment L/C, D/A, D/P, T/T, Western union, MoneyGram, Paypal, Wire-transfer Delivery time 10-15 working days ...
-
High Quality Metal Cobalt - Niobium Target ...
Product parameters Specification Item ASTM B393 9995 pure polished niobium target for industry Standard ASTM B393 Density 8.57g/cm3 Purity ≥99.95% Size according to customer’s drawings Inspection Chemical composition testing, Mechanical testing, Ultrasonic inspection, Appearance size detection Grade R04200, R04210, R04251, R04261 Surface polishing, grinding Technique sintered, rolled, forged Feature High temperature resistance, corrosion resistance Application S...
-
100% Original 9995 Pure Molybdenum Bar Rod - H...
Chemical Composition Mo ≥99.95% Fe <0.005% Ni <0.003% Cu <0.001% Al <0.001% Si <0.002% Ca <0.002% K <0.005% Na <0.001% Mg <0.001% Mn <0.001% W <0.015% Pb <0.0005% Bi <0.0005% Sn <0.0005% Sb <0.001% Cd <0.0005% P <0.001% S <0.002% C <0.005% O 0.03~0.2% Purpose High pure molybdenum is used as mammography, semiconductor and wiring materials, and other high-tech materials, also used in rocket nozzle, catalyst, ch...
-
Cobalt Metal Ingot - Tungsten Target – H...
Product parameters Product Name Tungsten(W)sputtering target Grade W1 Available Purity(%) 99.5%,99.8%,99.9%,99.95%,99.99% Shape: Plate, round, rotary, pipe/tube Specification As customers demands Standard ASTM B760-07,GB/T 3875-06 Density ≥19.3g/cm3 Melting point 3410°C Atomic volume 9.53 cm3/mol Temperature coefficient of resistance 0.00482 I/℃ Sublimation heat 847.8 kJ/mol(25℃) Latent heat of melting 40.13±6.67kJ/mol State Planar tungsten target,Rotating tung...
-
Molybdenum Bar - High Quality Spherical Molybd...
Chemical Composition Mo ≥99.95% Fe <0.005% Ni <0.003% Cu <0.001% Al <0.001% Si <0.002% Ca <0.002% K <0.005% Na <0.001% Mg <0.001% Mn <0.001% W <0.015% Pb <0.0005% Bi <0.0005% Sn <0.0005% Sb <0.001% Cd <0.0005% P <0.001% S <0.002% C <0.005% O 0.03~0.2% Purpose High pure molybdenum is used as mammography, semiconductor and wiring materials, and other high-tech materials, also used in rocket nozzle, catalyst, ch...