Ferro-Molybdenum - 99.95 Molybdenum Pure Molybdenum Product Moly Sheet Moly Plate Moly Foil In High Temperature Furnaces And Associated Equipment – HSG Metal
Ferro-Molybdenum - 99.95 Molybdenum Pure Molybdenum Product Moly Sheet Moly Plate Moly Foil In High Temperature Furnaces And Associated Equipment – HSG Metal Detail:
Product Parameters
| Item | molybdenum sheet/plate |
| Grade | Mo1, Mo2 |
| Stock size | 0.2mm, 0.5mm, 1mm, 2mm |
| MOQ | hot rolling, cleaning, polished |
| Stock | 1 kilograms |
| Property | anti-corrosion, high temperature resistance |
| Surface Treatment | Hot-rolled alkaline cleaning surface |
| Electrolytic polish surface | |
| Cold-rolled surface | |
| Machined surface | |
| Technology | extrusion, forging and rolling |
| Test and Quality | dimension inspection |
| appearance quality test | |
| process performance test | |
| mechanical properities test | |
| The specification would be changed by the customers’ requirements. | |
Specification
| Width, mm | Thickness, mm | Thickness deviation, min, mm | Flatness, % | |||
| <300mm | >0.13mm | ±0.025mm | 4% | |||
| ≥300mm | >0.25mm | ±0.06mm | 5%-8% | |||
| Purity(%) | Ag | Ni | P | Cu | Pb | N |
| <0.0001 | <0.0005 | <0.001 | <0.0001 | <0.0001 | <0.002 | |
| Si | Mg | Ca | Sn | Ba | Cd | |
| <0.001 | <0.0001 | <0.001 | <0.0001 | <0.0003 | <0.001 | |
| Na | C | Fe | O | H | Mo | |
| <0.0024 | <0.0033 | <0.0016 | <0.0062 | <0.0006 | >99.97 | |
Specification
| Specifications for molybdenum wire: | ||
| Molybdenum Wire Types | Diameter (inch) | Tolerance (%) |
| Molybdenum Wire for EDM | 0.0024″ ~ 0.01″ | ±3% wt |
| Molybdenum Spray Wire | 1/16″ ~ 1/8″ | ±1% to 3% wt |
| Molybdenum Wire | 0.002″ ~ 0.08″ | ±3% wt |
| Molybdenum Wire(clean) | 0.006″ ~ 0.04″ | ±3% wt |
Specificantions Range
1) Thickness: Hot-rolled plate:1.5~40mm; Cold-rolled plate/sheet:0.05~3.0mm
2) Width: Hot-rolled plate:≤750mm; Cold-rolled plate/sheet: ≤1050mm;
3) Length: Hot-rolled plate:≤3500mm; Cold-rolled plate/sheet: ≤2500mm
Application
| Classification | Feature | Application field |
| Pure Mo plate | High melting point, high purity, low thermal expansivity, excellent thermal conductivity, welding performance and processability | Widely used for manufacturing electron (ion) beam sputtering target, spare parts for ion implantation machine, heat sink of semiconductor, parts of electron tube, MOCVD equipment, and medical device, hot zone, crucible and supporting elements for sapphire crystal furnace, heater, heat shield, supporting element, and boat for vacuum and hydrogen shielded heating furnace |
| Pure Mo plate treated in high temperature | High-purity, consistent in physical and chemical property, and excellent high temperature anti-deforming capability | Suitable for manufacturing base plate for precision electronic ceramics and rear-earth material |
| Lanthanum-doped Mo plate | By using oxide dispersion strengthening mechanism, certain plastic deformation could be performed under room temperature after being treated in high temperature because of its high strength, high recrystallization temperature and excellent high-temperature strength and improved recrystallization brittleness and high temperature anti-deforming capability | particularly suitable for fabricating components used in more than 1500℃ work environment, such as heater, heat shield, base plate and boat for high temperature furnace |
| Lanthanum-doped Mo plate treated in high temperature | Excellent high-temperature strength, and low high temperature deformation due to its oxide dispersion strengthening effect and specific structure | suitable for making base plate for sintering fine ceramics and rear-earth ceramic, bearing rack, base plate and coat for high temperature heating furnace |
| Doped Mo plate | High temperature strength, low recrystallization temperature, and excellent high-temperature creep resistant performance because of its potassium bubble strengthening mechanism | particularly suitable for fabricating products with low high-temperature creep, such as components for electron tube, heater, heat shield, and so on for high temperature furnace |
| Doped Mo plate treated in high temperature | Low high-temperature creep due to its long grain staggered structure and high purity | suitable for making products with high requirement to purity and high-temperature creep, such as base plate for electronic ceramics sintering or heat-treating, supporting elements in electron tube, and so on |
| Cross-rolled pure Mo plate | Low anisotropy and good bending performance | particularly suitable for elongating, spinning, reinforcing and bending, and making elongating or spinning Mo crucible, Mo parts need to reinforce or bend, such as corrugated sheet, bending piece, Mo boat, and so on |
| Cross-rolled pure Mo plate treated in high temperature | Low anisotropy and good bending performance besides same performance of Lanthanum-doped Mo plate | particularly suitable for reinforcing and bending, and making reinforced or bended Mo parts with high temperature requirement, such as heating zone, bended fabricated parts, high-temperature Mo boat, and so on |
Product detail pictures:
Related Product Guide:
We usually think and practice corresponding for the change of circumstance, and grow up. We aim at the achievement of a richer mind and body as well as the living for Ferro-Molybdenum - 99.95 Molybdenum Pure Molybdenum Product Moly Sheet Moly Plate Moly Foil In High Temperature Furnaces And Associated Equipment – HSG Metal , The product will supply to all over the world, such as: Muscat, Ireland, Italy, If any product meed your demand, remember to feel free to contact us. We're sure your any inquiry or requirement will get prompt attention, high-quality merchandise, preferential prices and cheap freight. Sincerely welcome friends all over the world to call or come to visit, to discuss cooperation for a better future!
By Joanna from Kenya - 2017.06.25 12:48
A nice supplier in this industry, after a detail and careful discussion, we reached a consensus agreement. Hope that we cooperate smoothly.
By Deirdre from India - 2017.08.15 12:36
Related products
-
Professional China Cobalt Metal Plate - Niobiu...
Product parameters Specification Item ASTM B393 9995 pure polished niobium target for industry Standard ASTM B393 Density 8.57g/cm3 Purity ≥99.95% Size according to customer’s drawings Inspection Chemical composition testing, Mechanical testing, Ultrasonic inspection, Appearance size detection Grade R04200, R04210, R04251, R04261 Surface polishing, grinding Technique sintered, rolled, forged Feature High temperature resistance, corrosion resistance Application S...
-
Moly Bar - Tungsten Target – HSG Metal
Product parameters Product Name Tungsten(W)sputtering target Grade W1 Available Purity(%) 99.5%,99.8%,99.9%,99.95%,99.99% Shape: Plate, round, rotary, pipe/tube Specification As customers demands Standard ASTM B760-07,GB/T 3875-06 Density ≥19.3g/cm3 Melting point 3410°C Atomic volume 9.53 cm3/mol Temperature coefficient of resistance 0.00482 I/℃ Sublimation heat 847.8 kJ/mol(25℃) Latent heat of melting 40.13±6.67kJ/mol State Planar tungsten target,Rotating tung...
-
Hot New Products Pure Cobalt Ingots - High Pur...
Product parameters Product name Titanium target for pvd coating machine Grade Titanium (Gr1, Gr2, Gr5, Gr7,GR12) Alloy target: Ti-Al, Ti-Cr, Ti-Zr etc Origin Baoji city Shaanxi Province china Titanium content ≥99.5 (%) Impurity content <0.02 (%) Density 4.51 or 4.50 g/cm3 Standard ASTM B381; ASTM F67, ASTM F136 Size 1. Round target: Ø30–2000mm, thickness 3.0mm–300mm; 2. Plate Targe: Length: 200-500mm Width:100-230mm Thickness:3–40mm; 3. Tube target: Dia...
-
Low price for Sintering Tungsten Bar - High Pu...
Product Parameters Item name High Temperature Resistance 99.95% Pure tungsten crucible melting pot price pure tungsten W Purity: 99.95% Other Material W1,W2,WAL1,WAL2,W-Ni-Fe, W-Ni-Cu,WMO50,WMO20 Density 1.Sintering tungsten crucible Density:18.0 – 18.5 g/cm3; 2.Forging tungsten crucible Density:18.5 – 19.0 g/cm3 Dimension & Cubage According to your needs or drawings Delivery time 10-15 days Application It is widely used for smelting of rare earth metals, heatin...
-
Ingots Cobalt - Tungsten Target – HSG Metal
Product parameters Product Name Tungsten(W)sputtering target Grade W1 Available Purity(%) 99.5%,99.8%,99.9%,99.95%,99.99% Shape: Plate, round, rotary, pipe/tube Specification As customers demands Standard ASTM B760-07,GB/T 3875-06 Density ≥19.3g/cm3 Melting point 3410°C Atomic volume 9.53 cm3/mol Temperature coefficient of resistance 0.00482 I/℃ Sublimation heat 847.8 kJ/mol(25℃) Latent heat of melting 40.13±6.67kJ/mol State Planar tungsten target,Rotating tung...
-
High Quality Ferro Molybdenum - Molybdenum Pri...
Product Parameters Term Molybdenum bar Grade Mo1,Mo2,TZM,Mla,etc Size as request Surface condition hot rolling, cleaning, polishedc MOQ 1 kilograms Test and Quality dimension inspection appearance quality test process performance test mechanical properities test Load port shanghai shenzhen qingdao Packing standard wooden case, carton or as request Payment L/C, D/A, D/P, T/T, Western union, MoneyGram, Paypal, Wire-transfer Delivery time 10-15 working days ...