Ferro Moly Prijs - Ferro Vanadium – HSG Metal
Ferro Moly Prijs - Ferro Vanadium – HSG Metal Detail:
Specification of Ferrovanadium
|
Brand |
Chemical Compositions (%) |
||||||
|
V |
C |
Si |
P |
S |
Al |
Mn |
|
|
≤ |
|||||||
|
FeV40-A |
38.0~45.0 |
0.60 |
2.0 |
0.08 |
0.06 |
1.5 |
— |
|
FeV40-B |
38.0~45.0 |
0.80 |
3.0 |
0.15 |
0.10 |
2.0 |
— |
|
FeV50-A |
48.0~55.0 |
0.40 |
2.0 |
0.06 |
0.04 |
1.5 |
— |
|
FeV50-B |
48.0~55.0 |
0.60 |
2.5 |
0.10 |
0.05 |
2.0 |
— |
|
FeV60-A |
58.0~65.0 |
0.40 |
2.0 |
0.06 |
0.04 |
1.5 |
— |
|
FeV60-B |
58.0~65.0 |
0.60 |
2.5 |
0.10 |
0.05 |
2.0 |
— |
|
FeV80-A |
78.0~82.0 |
0.15 |
1.5 |
0.05 |
0.04 |
1.5 |
0.50 |
|
FeV80-B |
78.0~82.0 |
0.20 |
1.5 |
0.06 |
0.05 |
2.0 |
0.50 |
|
Size |
10-50mm |
||||||
Products Description
Ferrovanadium is an iron alloy obtained by reducing vanadium pentoxide in an electric furnace with carbon, and can also be obtained by reduction of vanadium pentoxide by electric furnace silicon thermal method.
It is widely used as an elemental additive for smelting vanadium-containing alloy steels and alloy cast irons, and has been used in recent years to make permanent magnets.
Ferrovanadium is mainly used as an alloying additive for steel making.
After adding vanadium iron to steel, the hardness, strength, wear resistance and ductility of the steel can be significantly improved, and the cutting performance of the steel can be improved.
Application of ferrovanadium
1. It Is an important alloy additive in iron and steel industry. It can improve the strength, toughness, ductility and heat resistance of steel. Since the 1960s, the application of ferrovanadium in the iron and steel industry has increased dramatically, to 1988 accounted for 85% of the consumption of ferro vanadium. The proportion of iron vanadium consumption in steel is carbon steel 20%, high strength low alloy steel 25%, alloy steel 20%, tool steel 15%. High strength low alloy steel (HSLA) containing vanadium iron is widely used in the production and construction of oil/gas pipelines, buildings, Bridges, rails, pressure vessels, carriage frames and so on due to its high strength.
2. In the non-ferrous alloy is mainly used to produce vanadium ferrotitanium alloy, such as Ti-6Al-4V, Ti-6Al-6V-2Sn and
Ti-8Al-1V-Mo. Ti-6al-4v alloy is used in the manufacture of aircraft and rockets excellent high temperature structural materials, in the United States is very important, the output of titanium vanadium ferroalloy accounted for more than half. Ferro vanadium metal can also be used in magnetic materials, cast iron, carbide, superconducting materials and nuclear reactor materials and other fields.
3. Is mainly used as an alloy additive in steelmaking. The hardness, strength, wear resistance and ductility of steel
can be significantly improved by adding ferrovanadium into steel, and the cutting performance of steel can be improved. Vanadium iron is commonly used in the production of carbon steel, low alloy steel strength steel, high alloy steel, tool steel and cast iron.
4. Suitable for alloy steel smelting, alloy element additive and stainless steel electrode coating, etc. This standard applies to the production of niobium pentoxide concentrate as raw material for steel making or casting additives, electrode as alloy agent, magnetic materials and other uses of iron vanadium.
Product detail pictures:
Related Product Guide:
It is a great way to further improve our products and repair. Our mission is always to create innovative products to prospects with a superior expertise for Ferro Moly Prijs - Ferro Vanadium – HSG Metal , The product will supply to all over the world, such as: Guatemala, Malaysia, Latvia, Our company always committed to meet your quality demand, price points and sales target. Warmly welcome you open the boundaries of communication. It is our great pleasure to service you if you need a trusted supplier and value information.
By Betty from Finland - 2018.10.01 14:14
This is a reputable company, they have a high level of business management, good quality product and service, every cooperation is assured and delighted!
By Adela from Danish - 2018.05.22 12:13
Related products
-
Tungsten Carbide Scrap - High Density Customiz...
Product Parameters Tungsten Block Polished 1kg Tungsten Cube 38.1mm Purity W≥99.95% Standard ASTM B760, GB-T 3875, ASTM B777 Surface Ground Surface, Machined surface Density 18.5 g/cm3 –19.2 g/cm3 Dimensions Common sizes：12.7*12.7*12.7mm20*20*20mm 25.4*25.4*25.4mm 38.1*38.1*38.1mm Application Ornament, decoration, Balance weight, desktop, gift, target, Military industry, and so on The characteristics 1. Laser engraving tungsten cube for 1kg 2. Melting point ...
-
2022 China New Design Femo 60 Ferromolybdenum -...
Chemical Composition Mo ≥99.95% Fe <0.005% Ni <0.003% Cu <0.001% Al <0.001% Si <0.002% Ca <0.002% K <0.005% Na <0.001% Mg <0.001% Mn <0.001% W <0.015% Pb <0.0005% Bi <0.0005% Sn <0.0005% Sb <0.001% Cd <0.0005% P <0.001% S <0.002% C <0.005% O 0.03~0.2% Purpose High pure molybdenum is used as mammography, semiconductor and wiring materials, and other high-tech materials, also used in rocket nozzle, catalyst, ch...
-
Ingots Cobalt - High Pure 99.8% titanium grade...
Product parameters Product name Titanium target for pvd coating machine Grade Titanium (Gr1, Gr2, Gr5, Gr7,GR12) Alloy target: Ti-Al, Ti-Cr, Ti-Zr etc Origin Baoji city Shaanxi Province china Titanium content ≥99.5 (%) Impurity content <0.02 (%) Density 4.51 or 4.50 g/cm3 Standard ASTM B381; ASTM F67, ASTM F136 Size 1. Round target: Ø30–2000mm, thickness 3.0mm–300mm; 2. Plate Targe: Length: 200-500mm Width:100-230mm Thickness:3–40mm; 3. Tube target: Dia...
-
Chinese Professional Iron Tungsten - Factory 0...
Specification Rand WAL1,WAL2 W1,W2 Black wire White wire Min Diameter(mm) 0.02 0.005 0.4 Max Diameter(mm) 1.8 0.35 0.8 Products Description 1. Purity:99.95% W1 2. Density: 19.3g/cm3 3. Grade:W1,W2,WAL1,WAL2 4. Shape:as your drawing. 5. Feature:High melting point, high temperature oxidation resistance, long service life, resistance to corrosion The chemical composition of tungsten wire Brand Tungsten Content /%≥ The sum of impurity elements /%≤ The content of ...
-
Ferro Molybdenum Price Trade - High Quality Pr...
Product Parameters Product name Pure molybdenum cube / molybdenum block for industry Grade Mo1 Mo2 TZM Type cube, block, ignot,lump Surface Polish/grinding/chemical wash Density 10.2g/cc Processing Rolling, Forging, Sintering Standard ASTM B 386-2003, GB 3876-2007, GB 3877-2006 Size Thickness: min0.01mmWidth: max 650mm Popular size 10*10*10mm / 20*20*20mm / 46*46*46 mm / 58*58*58mm Chemical requirements Element Ni Mg Fe Pb Al Bi Si Cd Ca P Concentration(%) 0.003 0.0...
-
High definition Pure Tungsten Scrap Price - Hi...
Product Parameters Item name High Temperature Resistance 99.95% Pure tungsten crucible melting pot price pure tungsten W Purity: 99.95% Other Material W1,W2,WAL1,WAL2,W-Ni-Fe, W-Ni-Cu,WMO50,WMO20 Density 1.Sintering tungsten crucible Density:18.0 – 18.5 g/cm3; 2.Forging tungsten crucible Density:18.5 – 19.0 g/cm3 Dimension & Cubage According to your needs or drawings Delivery time 10-15 days Application It is widely used for smelting of rare earth metals, heatin...