Cobalt Metal Ingot - Tantalum Target – HSG Metal
Cobalt Metal Ingot - Tantalum Target – HSG Metal Detail:
Product parameters
| Product Name：high purity tantalum target pure tantalum target | |
| Material | Tantalum |
| Purity | 99.95%min or 99.99%min |
| Color | A shiny, silvery metal that is very resistant to corrosion. |
| Other name | Ta target |
| Standard | ASTM B 708 |
| Size | Dia >10mm * thick >0.1mm |
| Shape | Planar |
| MOQ | 5pcs |
| Delivery time | 7days |
| Used | Sputtering Coating Machines |
Table 1: Chemical composition
| Chemistry (%) | |||||||||||||
| Designation | Chief component | Impurities maxmium | |||||||||||
| Ta | Nb | Fe | Si | Ni | W | Mo | Ti | Nb | O | C | H | N | |
| Ta1 | Remainder | 0.004 | 0.003 | 0.002 | 0.004 | 0.006 | 0.002 | 0.03 | 0.015 | 0.004 | 0.0015 | 0.002 | |
| Ta2 | Remainder | 0.01 | 0.01 | 0.005 | 0.02 | 0.02 | 0.005 | 0.08 | 0.02 | 0.01 | 0.0015 | 0.01 | |
Table 2: Mechanical requirements (annealed condition)
|
Grade and size |
Annealed |
||
|
Tensile strength min, psi (MPa) |
Yield strength min,psi (MPa)(2%) |
Elongation min, % (1 inch gage length) |
|
|
Sheet, foil. and board (RO5200, RO5400) Thickness<0.060″(1.524mm) Thickness≥0.060″(1.524mm) |
30000 (207) |
20000 (138) |
20 |
|
25000 (172) |
15000 (103) |
30 |
|
|
Ta-10W (RO5255) Sheet, foil. and board |
70000 (482) |
60000 (414) |
15 |
|
70000 (482) |
55000 (379) |
20 |
|
|
Ta-2.5W (RO5252) Thickness<0.125″ (3.175mm) Thickness≥0.125″ (3.175mm) |
40000 (276) |
30000 (207) |
20 |
|
40000 (276) |
22000 (152) |
25 |
|
|
Ta-40Nb (RO5240) Thickness<0.060″(1.524mm) |
40000 (276) |
20000 (138) |
25 |
|
Thickness>0.060″(1.524mm) |
35000 (241) |
15000 (103) |
25 |
Size and Purity
Diameter: dia (50~400)mm
Thickness: (3~28mm)
Grade: RO5200,RO 5400, RO5252(Ta-2.5W)， RO5255(Ta-10W)
Purity: >=99.95% , >=99.99%
Our advantage
Recrystallization: 95% minimum Grain size: minimum 40μm Surface roughness: Ra 0.4 max Flatness: 0.1mm or 0.10% max. Tolerance: diameter tolerance +/- 0.254
Application
Tantalum target, as an electrode material and surface engineering material, has been widely used in the coating industry of liquid crystal display (LCD), heat-resistant corrosion and high conductivity.
Product detail pictures:
Related Product Guide:
We not only will try our greatest to supply outstanding services to every shopper, but also are ready to receive any suggestion offered by our buyers for Cobalt Metal Ingot - Tantalum Target – HSG Metal , The product will supply to all over the world, such as: Czech Republic, French, Provence, we sincerely hope to establish a good and long-term business relationship with your esteemed company through this opportunity, based on equality, mutual benefit and win-win business from now to the future. "Your satisfaction is our happiness".
By Andy from Egypt - 2017.07.28 15:46
The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
By Aaron from Afghanistan - 2018.06.21 17:11
Related products
-
2022 Good Quality Ferro Molybdenum Manufacturin...
Molybdenum wire advantage 1. Molybdenum wire high pricision,line diameter tolerance control at less than 0 to 0.002mm 2. The ratio of breaking wire low,processing rate is high,good performance and good price. 3. Can finish the stable long time continuous processing. Products Description Edm molybdenum Moly wire 0.18mm 0.25mm Molybdenum wire(spray moly wire)is mainly used for auto parts spraying,such as piston ring,synchronizer rings,shift elements,etc.Molybdenum spray wire is also used in rep...
-
Ferro Vanadium - HSG Ferro Tungsten price for ...
We supply Ferro Tungsten of all grades as follows Grade FeW 8OW-A FeW80-B FEW 80-C W 75%-80% 75%-80% 75%-80% C 0.1% max 0.3% max 0.6% max P 0.03% max 0.04% max 0.05% max S 0.06% max 0.07% max 0.08% max Si 0.5% max 0.7% max 0.7% max Mn 0.25% max 0.35% max 0.5% max Sn 0.06% max 0.08% max 0.1% max Cu 0.1% max 0.12% max 0.15% max As 0.06% max 0.08% max 0.10% max Bi 0.05% max 0.05% max 0.0...
-
Ferrotungstene - High Density Customized Cheap...
Product Parameters Tungsten Block Polished 1kg Tungsten Cube 38.1mm Purity W≥99.95% Standard ASTM B760, GB-T 3875, ASTM B777 Surface Ground Surface, Machined surface Density 18.5 g/cm3 –19.2 g/cm3 Dimensions Common sizes：12.7*12.7*12.7mm20*20*20mm 25.4*25.4*25.4mm 38.1*38.1*38.1mm Application Ornament, decoration, Balance weight, desktop, gift, target, Military industry, and so on The characteristics 1. Laser engraving tungsten cube for 1kg 2. Melting point ...
-
2022 wholesale price Ferrotungsten Powder - Su...
Product Parameters item value Place of Origin China Brand Name HSG Model Number SY-WC-01 Application Grinding ,Coating ,ceramics Shape Powder Material Tungsten Chemical Composition WC Product name Tungsten Carbide Appearance Black hexagonal crystal, metallic luster CAS No 12070-12-1 EINECS 235-123-0 The resistivity 19.2*10-6Ω*cm Density 15.63g/m3 UN Number UN3178 Hardness 93.0-93.7HRA Sample Available Purity 93.0-93.7HRA Specification Part ...
-
Ferro Molybdenum Price Per Kg - High Pure 99.9...
Product Parameters Product Name Best price pure molybdenum tube with various specifications Material pure molybdenum or molybdenum alloy Size reference the below details Model Number Mo1 Mo2 Surface hot rolling, cleaning, polished Delivery time 10-15 working days MOQ 1 kilograms Used Aerospace industry, Chemical equipment industry The specification would be changed by the customers’ requirements. Regular size range Diameter (mm) Wall thickness (mm) Len...
-
Factory Supply Ferro Columbium Price – Ch...
Chemical Composition FeMo composition (%) Grade Mo Si S P C Cu FeMo70 65-75 2 0.08 0.05 0.1 0.5 FeMo60-A 60-65 1 0.08 0.04 0.1 0.5 FeMo60-B 60-65 1.5 0.1 0.05 0.1 0.5 FeMo60-C 60-65 2 0.15 0.05 0.15 1 FeMo55-A 55-60 1 0.1 0.08 0.15 0.5 FeMo55-B 55-60 1.5 0.15 0.1 0.2 0.5 Products Description Ferro Molybdenum70 is mainly used to add molybdenum to steel in steel making. Molybde...