99.995 Indium Ingot - Tantalum Target – HSG Metal
99.995 Indium Ingot - Tantalum Target – HSG Metal Detail:
Product parameters
| Product Name：high purity tantalum target pure tantalum target | |
| Material | Tantalum |
| Purity | 99.95%min or 99.99%min |
| Color | A shiny, silvery metal that is very resistant to corrosion. |
| Other name | Ta target |
| Standard | ASTM B 708 |
| Size | Dia >10mm * thick >0.1mm |
| Shape | Planar |
| MOQ | 5pcs |
| Delivery time | 7days |
| Used | Sputtering Coating Machines |
Table 1: Chemical composition
| Chemistry (%) | |||||||||||||
| Designation | Chief component | Impurities maxmium | |||||||||||
| Ta | Nb | Fe | Si | Ni | W | Mo | Ti | Nb | O | C | H | N | |
| Ta1 | Remainder | 0.004 | 0.003 | 0.002 | 0.004 | 0.006 | 0.002 | 0.03 | 0.015 | 0.004 | 0.0015 | 0.002 | |
| Ta2 | Remainder | 0.01 | 0.01 | 0.005 | 0.02 | 0.02 | 0.005 | 0.08 | 0.02 | 0.01 | 0.0015 | 0.01 | |
Table 2: Mechanical requirements (annealed condition)
|
Grade and size |
Annealed |
||
|
Tensile strength min, psi (MPa) |
Yield strength min,psi (MPa)(2%) |
Elongation min, % (1 inch gage length) |
|
|
Sheet, foil. and board (RO5200, RO5400) Thickness<0.060″(1.524mm) Thickness≥0.060″(1.524mm) |
30000 (207) |
20000 (138) |
20 |
|
25000 (172) |
15000 (103) |
30 |
|
|
Ta-10W (RO5255) Sheet, foil. and board |
70000 (482) |
60000 (414) |
15 |
|
70000 (482) |
55000 (379) |
20 |
|
|
Ta-2.5W (RO5252) Thickness<0.125″ (3.175mm) Thickness≥0.125″ (3.175mm) |
40000 (276) |
30000 (207) |
20 |
|
40000 (276) |
22000 (152) |
25 |
|
|
Ta-40Nb (RO5240) Thickness<0.060″(1.524mm) |
40000 (276) |
20000 (138) |
25 |
|
Thickness>0.060″(1.524mm) |
35000 (241) |
15000 (103) |
25 |
Size and Purity
Diameter: dia (50~400)mm
Thickness: (3~28mm)
Grade: RO5200,RO 5400, RO5252(Ta-2.5W)， RO5255(Ta-10W)
Purity: >=99.95% , >=99.99%
Our advantage
Recrystallization: 95% minimum Grain size: minimum 40μm Surface roughness: Ra 0.4 max Flatness: 0.1mm or 0.10% max. Tolerance: diameter tolerance +/- 0.254
Application
Tantalum target, as an electrode material and surface engineering material, has been widely used in the coating industry of liquid crystal display (LCD), heat-resistant corrosion and high conductivity.
Product detail pictures:
Related Product Guide:
We depend on sturdy technical force and continually create sophisticated technologies to meet the demand of 99.995 Indium Ingot - Tantalum Target – HSG Metal , The product will supply to all over the world, such as: Amman, Seattle, Japan, All these products are manufactured in our factory located in China. So we can guarantee our quality seriously and availably. Within these four years we sell not only our products but also our service to clients throughout the world.
By Karl from Berlin - 2018.12.14 15:26
The factory technical staff not only have high level of technology, their English level is also very good, this is a great help to technology communication.
By Frank from Ecuador - 2018.07.27 12:26
Related products
-
Vanadium Iron - Ferro Vanadium – HSG Metal
Specification of Ferrovanadium Brand Chemical Compositions (%) V C Si P S Al Mn ≤ FeV40-A 38.0~45.0 0.60 2.0 0.08 0.06 1.5 — FeV40-B 38.0~45.0 0.80 3.0 0.15 0.10 2.0 — FeV50-A 48.0~55.0 0.40 2.0 0.06 0.04 1.5 — FeV50-B 48.0~55.0 0.60 2.5 0.10 0.05 2.0 — FeV60-A 58.0~65.0 0.40 2.0 0.06 0.04 1.5 — FeV60-B 58.0~65.0 0.60 2.5 0.10 0.05 2...
-
Metallic Cobalt - Tungsten Target – HSG ...
Product parameters Product Name Tungsten(W)sputtering target Grade W1 Available Purity(%) 99.5%,99.8%,99.9%,99.95%,99.99% Shape: Plate, round, rotary, pipe/tube Specification As customers demands Standard ASTM B760-07,GB/T 3875-06 Density ≥19.3g/cm3 Melting point 3410°C Atomic volume 9.53 cm3/mol Temperature coefficient of resistance 0.00482 I/℃ Sublimation heat 847.8 kJ/mol(25℃) Latent heat of melting 40.13±6.67kJ/mol State Planar tungsten target,Rotating tung...
-
9995 Pure Molybdenum Bar Rod - 0.18mm EDM Moly...
Molybdenum wire advantage 1. Molybdenum wire high pricision,line diameter tolerance control at less than 0 to 0.002mm 2. The ratio of breaking wire low,processing rate is high,good performance and good price. 3. Can finish the stable long time continuous processing. Products Description Edm molybdenum Moly wire 0.18mm 0.25mm Molybdenum wire(spray moly wire)is mainly used for auto parts spraying,such as piston ring,synchronizer rings,shift elements,etc.Molybdenum spray wire is also used in rep...
-
2022 wholesale price Ferro Niobium 65 - Good A...
Product Parameters item value Place of Origin China Hebei Brand Name HSG Model Number SY-Nb Application For Metallurgical Purposes Shape powder Material Niobium powder Chemical Composition Nb>99.9% Particle Size Customization Nb Nb>99.9% C C< 500ppm Ni Ni<300ppm Cr Cr<10ppm W W<10ppm N N<10ppm Chemical Composition HRNb-1 O H C N Fe Si Ni Cu 0.20 0.005 0.05 0.04 0.01 0.005 0.005 0.005 T...
-
Femo 60 Ferromolybdeen - China Ferro Molybdenu...
Chemical Composition FeMo composition (%) Grade Mo Si S P C Cu FeMo70 65-75 2 0.08 0.05 0.1 0.5 FeMo60-A 60-65 1 0.08 0.04 0.1 0.5 FeMo60-B 60-65 1.5 0.1 0.05 0.1 0.5 FeMo60-C 60-65 2 0.15 0.05 0.15 1 FeMo55-A 55-60 1 0.1 0.08 0.15 0.5 FeMo55-B 55-60 1.5 0.15 0.1 0.2 0.5 Products Description Ferro Molybdenum70 is mainly used to add molybdenum to steel in steel making. Molybde...
-
Chinese wholesale Tungsten Iron - Supply High ...
Product Parameters item value Place of Origin China Brand Name HSG Model Number SY-WC-01 Application Grinding ,Coating ,ceramics Shape Powder Material Tungsten Chemical Composition WC Product name Tungsten Carbide Appearance Black hexagonal crystal, metallic luster CAS No 12070-12-1 EINECS 235-123-0 The resistivity 19.2*10-6Ω*cm Density 15.63g/m3 UN Number UN3178 Hardness 93.0-93.7HRA Sample Available Purity 93.0-93.7HRA Specification Part ...