2022 Good Quality Ferro Molybdeen 60 - Ferro Vanadium – HSG Metal
2022 Good Quality Ferro Molybdeen 60 - Ferro Vanadium – HSG Metal Detail:
Specification of Ferrovanadium
|
Brand |
Chemical Compositions (%) |
||||||
|
V |
C |
Si |
P |
S |
Al |
Mn |
|
|
≤ |
|||||||
|
FeV40-A |
38.0~45.0 |
0.60 |
2.0 |
0.08 |
0.06 |
1.5 |
— |
|
FeV40-B |
38.0~45.0 |
0.80 |
3.0 |
0.15 |
0.10 |
2.0 |
— |
|
FeV50-A |
48.0~55.0 |
0.40 |
2.0 |
0.06 |
0.04 |
1.5 |
— |
|
FeV50-B |
48.0~55.0 |
0.60 |
2.5 |
0.10 |
0.05 |
2.0 |
— |
|
FeV60-A |
58.0~65.0 |
0.40 |
2.0 |
0.06 |
0.04 |
1.5 |
— |
|
FeV60-B |
58.0~65.0 |
0.60 |
2.5 |
0.10 |
0.05 |
2.0 |
— |
|
FeV80-A |
78.0~82.0 |
0.15 |
1.5 |
0.05 |
0.04 |
1.5 |
0.50 |
|
FeV80-B |
78.0~82.0 |
0.20 |
1.5 |
0.06 |
0.05 |
2.0 |
0.50 |
|
Size |
10-50mm |
||||||
Products Description
Ferrovanadium is an iron alloy obtained by reducing vanadium pentoxide in an electric furnace with carbon, and can also be obtained by reduction of vanadium pentoxide by electric furnace silicon thermal method.
It is widely used as an elemental additive for smelting vanadium-containing alloy steels and alloy cast irons, and has been used in recent years to make permanent magnets.
Ferrovanadium is mainly used as an alloying additive for steel making.
After adding vanadium iron to steel, the hardness, strength, wear resistance and ductility of the steel can be significantly improved, and the cutting performance of the steel can be improved.
Application of ferrovanadium
1. It Is an important alloy additive in iron and steel industry. It can improve the strength, toughness, ductility and heat resistance of steel. Since the 1960s, the application of ferrovanadium in the iron and steel industry has increased dramatically, to 1988 accounted for 85% of the consumption of ferro vanadium. The proportion of iron vanadium consumption in steel is carbon steel 20%, high strength low alloy steel 25%, alloy steel 20%, tool steel 15%. High strength low alloy steel (HSLA) containing vanadium iron is widely used in the production and construction of oil/gas pipelines, buildings, Bridges, rails, pressure vessels, carriage frames and so on due to its high strength.
2. In the non-ferrous alloy is mainly used to produce vanadium ferrotitanium alloy, such as Ti-6Al-4V, Ti-6Al-6V-2Sn and
Ti-8Al-1V-Mo. Ti-6al-4v alloy is used in the manufacture of aircraft and rockets excellent high temperature structural materials, in the United States is very important, the output of titanium vanadium ferroalloy accounted for more than half. Ferro vanadium metal can also be used in magnetic materials, cast iron, carbide, superconducting materials and nuclear reactor materials and other fields.
3. Is mainly used as an alloy additive in steelmaking. The hardness, strength, wear resistance and ductility of steel
can be significantly improved by adding ferrovanadium into steel, and the cutting performance of steel can be improved. Vanadium iron is commonly used in the production of carbon steel, low alloy steel strength steel, high alloy steel, tool steel and cast iron.
4. Suitable for alloy steel smelting, alloy element additive and stainless steel electrode coating, etc. This standard applies to the production of niobium pentoxide concentrate as raw material for steel making or casting additives, electrode as alloy agent, magnetic materials and other uses of iron vanadium.
Product detail pictures:
Related Product Guide:
With our loaded practical experience and thoughtful solutions, we now have been identified for a trusted provider for numerous intercontinental consumers for 2022 Good Quality Ferro Molybdeen 60 - Ferro Vanadium – HSG Metal , The product will supply to all over the world, such as: Belarus, Cambodia, Croatia, Our company now has many department, and there have more than 20 employees in our company. We set up sales shop, show room, and product warehouse. In the meantime, we registered our own brand. We have tightened inspection for quality of product.
By Alexander from Mali - 2017.05.21 12:31
The enterprise has a strong capital and competitive power, product is sufficient, reliable, so we have no worries on cooperating with them.
By Mark from Estonia - 2017.09.16 13:44
Related products
-
Iron Niobium - High Purity And High Temperatur...
Dimension 15-20 mm x 15-20 mm x 400-500 mm We can also chip or crush the bar to smaller size based on your request Impurity content Fe Si Ni W Mo Ti 0.004 0.004 0.002 0.005 0.005 0.002 Ta O C H N 0.05 0.012 0.0035 0.0012 0.003 Products Description Niobium bar is sintered from Nb2O5 powders, a semi-finished product which is taken for melting niobium ingot, or as an alloy additive for steel or superalloy production. Our niobium bar are c...
-
Ferrovanadium 80 - Ferro Vanadium – HSG ...
Specification of Ferrovanadium Brand Chemical Compositions (%) V C Si P S Al Mn ≤ FeV40-A 38.0~45.0 0.60 2.0 0.08 0.06 1.5 — FeV40-B 38.0~45.0 0.80 3.0 0.15 0.10 2.0 — FeV50-A 48.0~55.0 0.40 2.0 0.06 0.04 1.5 — FeV50-B 48.0~55.0 0.60 2.5 0.10 0.05 2.0 — FeV60-A 58.0~65.0 0.40 2.0 0.06 0.04 1.5 — FeV60-B 58.0~65.0 0.60 2.5 0.10 0.05 2...
-
PriceList for Sintered Tungsten Bar – Hot...
Product Parameters Product Name factory best price customized 99.95% pure tungsten pipe tube Material pure tungsten Color metal color Model Number W1 W2 WAL1 WAL2 Packing Wooden Case Used Aerospace industry, Chemical equipment industry Diameter (mm) Wall thickness (mm) Length (mm) 30-50 2–10 <600 50-100 3–15 100-150 3–15 150-200 5–20 200-300 8–20 300-400 8–30 400-450 8–30 450-500 8–30 Chemical Composition...
-
China Cheap price Ferro Moly Price - China Fer...
Chemical Composition FeMo composition (%) Grade Mo Si S P C Cu FeMo70 65-75 2 0.08 0.05 0.1 0.5 FeMo60-A 60-65 1 0.08 0.04 0.1 0.5 FeMo60-B 60-65 1.5 0.1 0.05 0.1 0.5 FeMo60-C 60-65 2 0.15 0.05 0.15 1 FeMo55-A 55-60 1 0.1 0.08 0.15 0.5 FeMo55-B 55-60 1.5 0.15 0.1 0.2 0.5 Products Description Ferro Molybdenum70 is mainly used to add molybdenum to steel in steel making. Molybde...
-
High definition Ferrovanadium 80 - Ferro Vanad...
Specification of Ferrovanadium Brand Chemical Compositions (%) V C Si P S Al Mn ≤ FeV40-A 38.0~45.0 0.60 2.0 0.08 0.06 1.5 — FeV40-B 38.0~45.0 0.80 3.0 0.15 0.10 2.0 — FeV50-A 48.0~55.0 0.40 2.0 0.06 0.04 1.5 — FeV50-B 48.0~55.0 0.60 2.5 0.10 0.05 2.0 — FeV60-A 58.0~65.0 0.40 2.0 0.06 0.04 1.5 — FeV60-B 58.0~65.0 0.60 2.5 0.10 0.05 2...
-
Indium Metal Ingots - High Pure 99.8% titanium...
Product parameters Product name Titanium target for pvd coating machine Grade Titanium (Gr1, Gr2, Gr5, Gr7,GR12) Alloy target: Ti-Al, Ti-Cr, Ti-Zr etc Origin Baoji city Shaanxi Province china Titanium content ≥99.5 (%) Impurity content <0.02 (%) Density 4.51 or 4.50 g/cm3 Standard ASTM B381; ASTM F67, ASTM F136 Size 1. Round target: Ø30–2000mm, thickness 3.0mm–300mm; 2. Plate Targe: Length: 200-500mm Width:100-230mm Thickness:3–40mm; 3. Tube target: Dia...